C106 Die-cutting Machine,Diecutter and Foil Stamping Machine

Product

Die Cutting Machine 165 Format

Die-Cutting Machine 130 Format

Die Cutting Machine 106 Format

Die-Cutting Machine 80 Format

Semi-auto Die-cutting Machine

Manual Foil-stamping Machine

Manual Die-cutter

Foil-stamping Machine

T-series Die-cutting Machine

Double Station Diecutter and foil-stamper

Die Cutting Machine 106 Format

Home - Product - Diecutter and Foil Stamping Machine

C106 Die-cutting Machine

Product Description

Specification

video

Feeding unit

● High quality feeder made in Taiwan with 4 suckers for lifting paper and 4 suckers for forwarding paper ensure stable and fast feeding paper. The height and angle of suckers are easily adjustable to keep sheets absolutely straight.

● Mechanical double-sheet detector, sheet-retarding device, adjustable air blower ensure sheets transfer to the belt table steadily and precisely.

● Vacuum pump is from German Becker.

● Lateral pile can be adjusted by motor for accurate sheet feeding.

● Pre-piling device makes non-stop feeding with high pile (Max. pile height is up to 1600mm).

● Perfect piles can be formed on pallets which run on rails for pre-piling. This makes a significant contribution to smooth production and let operator move the prepared pile to feeder accurately and conveniently.

● Single position engagemed meent pneumatic operatchanical clutch insures the first sheet after every re-start of machine is always fed to front lays for easy, time-saving and material-saving make-ready.

● The side lays can be switched directly between pull and push mode on both sides of the machine simply by turning a bolt without having to add or remove parts. This provides the flexibility for processing a wide range of material: irrespective of whether the register marks are to the left or right of the sheet.

● Side and front lays are with precision optical sensors, which can detect dark color and plastic sheet. The sensitivity is adjustable.

● Optical sensors with automatic stop system on feeding table enable you to optimize system monitoring- for comprehensive quality control over the entire sheet width and paper jam.

● Operation panel for feeding part is easier to control the feeding process with LED displayer.

● Separate drive controls for main pile and

● PLC and electronic cam for timing control

● Anti-obstacle device can avoid the machine damage.

● Swiss Rapplon convey belt for feeder and the speed is adjustable

auxiliary pile

l●High quality feeder made in Taiwan with 4 suckers for lifting paper and 4 suckers for forwarding paper ensure stable and fast feeding paper. The height and angle of suckers are easily adjustable to keep sheets absolutely straight.

l Top quality resin casting iron

● Top quality resin casting iron

● 10.4 inch TFT Touch screen monitor

● Software with full function and dynamic demonstration

l Chromed platform

l Double linear guide way

l Worm Gear transmission for knife holder and cutting speed is up to 45 times/min

l Ball screw lever

l German solenoid for safety latch

l Italy gear pump, soft clamp to conform with CE requirement

l Hydraulic clutch , high quality domestic hydraulic system

l Standard side table

l Easy knife change system

l Imported V-belt and bearing

l Philips cutting line system

l FUJI Servo system with 18m/min max. high speed back-gauge

l USB port and remote online and offline program system

l All electrical component and whole machine design pass Euro CE.

l 2 PCS OF Kanefusa HSS knife

l Cutting stick 10 pcs

l Operation manual and tool kit

Die-cutting unit

● Pneumatic lock system makes easier lock-up and release of cutting chase and cutting plate.

● Pneumatic lifting cutting plate for easy slide in and out.

● Centerline system on die-cutting chase with transversal micro adjustment ensures accurate registration that result in quick job changeover.

● Accurate positioning of Cutting chase controlled by precision optical sensors with automatic check-lock device

● Cutting chase turnover device

● Siemens main motor controlled by Schneider inverter.

● Micro-adjustment of cutting force （pressure accuracy can be up to 0.01mm of encoder, Max. die-cutting pressure can be up to 300 tons） by worm gear driven by servo motor and controlled easily by 15 inch touch screen.

● Crankshaft is made of 40Cr steel.

● HT300 ductile iron for machine frames and platens

● 7 sets of gripper bars with grippers made of lightweight and durable aluminum alloy with ultra hard coat and anodized finish ensure accurate and consistent paper registration.

● High quality gripper bar from Japan with long life

● Uniquely designed gripper bar need no spacer for compensation to insure accurate paper registration

● High quality Renold chain from England with pre-extended treatment ensures stability and accuracy in long run.

● High pressure index drive system for gripper bar positioning control

● Overload protection device with torque limiter creates the highest level of security for operator and machine.

● Automatic lubrication and cooling system for main drive and automatic lubrication for main chain.

Cutting width ( mm/inch)	1150mm / 45 1/4”
Cutting height(without false clamp plate)	165mm / 6 1/2”
Cutting length	1150mm / 45 1/4”
Main motor power	4kw
Net weight	3800kg / 8360lbs
Machine width with side table	2650mm/ 104 1/3”
Machine width without side table	2365mm / 93 1/8”
Machine length	2465mm/ 97”
Machine height	1650mm / 65”
Clamp pressure min.	1.5KN / 330lbs
Clamp pressure max.	45KN / 9920lbs
Blade specification	13.75mm
Grinding reserve	60mm / 2 3/8”
Smallest cut without false clamp	25mm / 1”
Smallest cut with false clamp	95mm / 3 3/4”
Cutting speed	45 time/min
Packing size (LxWxH)	2650x1500x2000mm
Power supply	380V 50Hz 3 phase
Wire thickness	2.5 mm2