Product
Double station Diecutter and Foil-stamper
Die-Cutting Machine 130 Format
T-serie Die-cutting Machine
Manual Foil-stamping Machine
Manual Die-Cutter
Die-Cutting Machine 80 Format
Die Cutting Machine 106 Format
Die Cutting Machine 165 Format
Semi-auto Die Cutting Machine
Foil Stamping Machine
Laminator
Folder Gluer Premium Version
Board to Board Laminator
Stripping Machine
Window Patching Machine
Inspection Machine
 
Die Cutting Machine 106 Format Home - Product - Die Cutter , Folder Gluer, Laminator, Window Patcher,Inspection Machine
  C106Q Die Cutting Machine with Stripping
Product Description Specification video  

        Feeding unit:        
High quality feeder made in Taiwan with 4 suckers for lifting paper and 4 suckers  for forwarding paper ensure stable and fast feeding paper.  The height and angle of suckers are easily adjustable to keep sheets absolutely straight.
Mechanical double-sheet detector, sheet-retarding device, adjustable air blower ensure sheets transfer to the belt table steadily and precisely.  
Vacuum pump is from German Becker. 
Lateral pile can be adjusted by motor for accurate sheet feeding.
Pre-piling device makes non-stop feeding with high pile (Max. pile height is up to 1600mm).
Perfect piles can be formed on pallets which run on rails for pre-piling. This makes a significant contribution to smooth production and let operator move the prepared pile to feeder accurately and conveniently.
Single position engagement pneumatic operated mechanical clutch insures the first sheet after every re-start of machine is always fed to front lays for easy, time-saving and material-saving make-ready.
The side lays can be switched directly between pull and push mode on both sides of the machine simply by turning a bolt without having to add or remove parts. This provides the flexibility for processing a wide range of material: irrespective of whether the register marks are to the left or right of the sheet.
Side and front lays are with precision optical sensors, 

         which can detect dark color and plastic sheet. The sensitivity is adjustable.

        Optical sensors with automatic stop system on feeding table enable you to optimize system monitoring-

         for comprehensive quality control over the entire sheet width and paper jam. 
Operation panel for feeding part is easier to control the feeding process with LED displayer.
Separate drive controls for main pile and auxiliary pile
PLC and electronic cam for timing control
Anti-obstacle device can avoid the machine damage. 
Swiss Rapplon convey belt for feeder and the speed is adjustable 


Die-cutting unit
Pneumatic lock system makes easier lock-up and release of cutting chase and cutting plate.
Pneumatic lifting cutting plate for easy slide in and out.
Centerline system on die-cutting chase with transversal micro adjustment ensures accurate registration that result in quick job changeover.

        Accurate positioning of Cutting chase controlled by precision optical sensors with automatic check-lock device 

        Cutting chase turnover device

       Siemens main motor controlled by Schneider inverter.         

       Micro-adjustment of cutting force (pressure accuracy can be up to 0.01mm of encoder, Max. die-cutting pressure can be up to 300 tons) by worm gear driven by servo motor and controlled easily by 15 inch touch screen.

        Crankshaft is made of 40Cr steel.  
HT300 ductile iron for machine frames and platens
7 sets of gripper bars with grippers made of lightweight and durable aluminum alloy with ultra hard coat and anodized finish ensure accurate and consistent paper registration.
High quality gripper bar from Japan with long life 
Uniquely designed gripper bar need no spacer for compensation to insure accurate paper registration
High quality Renold chain from England with pre-extended treatment ensures stability and accuracy in long run. 
High pressure index drive system for gripper bar positioning control
Overload protection device with torque limiter creates the highest level of security for operator and machine.
Automatic lubrication and cooling system for main drive and automatic lubrication for main chain. 


Stripping Unit
3-action movement structure with upper, middle and lower stripping frame which are driven respectively by 3 cam wheels which is more tolerant in long run. 
Match with the centerline registration system in die-cutting section, the same system also apply to the stripping station to minimize changeover time. Accurate positioning can increase production efficiency.
Stripping pins or male/female die can be used for different stripping jobs.
Optional Pre make ready table for the stripping device


Delivery Unit
Adjustable braking brush controlled by AC motor help to unload paper from gripper and piling up paper in higher speed and perfect alignment 
Delivery pile height is up to 1350mm. 
Back layer of delivery unit can be adjusted by servo-motor to fit different sizes of paper.
Photoelectric devices preventing over-ascending and over-descending of delivery paper pile
Pile can be counted by optical sensor (standard) and the unit can be integrated with a device  for inserting paper slips into the pile (optional). It will facilitate to take off blanks and pack them into cases.
The whole machine can be adjusted by 10.4 inch touch monitor in rear side 
Auxiliary delivery rack is configured for non-stop delivery.


Electric Parts
Electronic detectors, micro switched and photoelectric cells controlled by PLC on entire machine
Omron Electronic cam switch and encoder
All the major operation can be done by 15 and 10.4 inch touch monitor.
PILZ safety relay as standard ensure highest safety standard.
Internal inter-lock switch fulfill CE requirement.
Applies electric parts including Moeller, Omron, Schneider relay, AC contactor and air breaker to assure stability in long run. 
Automatic fault display and self-diagnose.




Sheet Size (Max.) 1060*760mm
Sheet Size (Min.) 450*370mm
Max. Die-cutting Size 1045*745mm
Gripper Margin 7mm-17mm
Max. Pressure 300T
Paper Thickness 90-2000GSM 
0.1-3mm cardboard
≤4mm corrugated paper 
Max. Die-cutting Speed 7500 s/h
Max. Pile Height at Feeder 1600mm
Max. Pile Height at Delivery 1350mm
Main Motor Power 11kw
Total Power 17kw
Weight  17 Ton
Overall Dimension 6260*4560*2580mm
Air Source 0.5-0.8mpa,600L/Min


About Us
  The History of Eureka
  Products Advantage
  Qualification
Service&Q.C
  Service&Q.C
Product
  Medical protective equipments
  Cutting System
  Die Cutter , Folder Gluer, Laminator, Window Patcher,Inspection Machine
  Sheeter and A4 Cut Size
Customers
  Customer in UAE
  Customer in Fiji
  Customer in Turkey
  Customer in Brazil
  Customer in Iran
  Customer in USA
  Customer in Mexico
  Customers in India
  Business Activities
Sales Network
  Sales Network
Events & News
  Events
  News
Our Partner
  GUOWANG
  CHM
  Dealer in Saudi Arabia
Contact Us
  Contact Us
  © copyright 2015 Eureka machinery imp