 |
Product |
|
|
| Foil-stamping Machine |
Home - Product - Diecutter and Foil Stamping Machine |
 |
Feeding unit
● High quality feeder made in Taiwan with 4 suckers for lifting paper and 4 suckers for forwarding paper ensure stable and fast feeding paper. The height and angle of suckers are easily adjustable to keep sheets absolutely straight.
● Mechanical double-sheet detector, sheet-retarding device, adjustable air blower ensure sheets transfer to the belt table steadily and precisely.
● Vacuum pump is from German Becker.
● Lateral pile can be adjusted by motor for accurate sheet feeding.
● Pre-piling device makes non-stop feeding with high pile (Max. pile height is up to 1600mm).
● Perfect piles can be formed on pallets which run on rails for pre-piling. This makes a significant contribution to smooth production and let operator move the prepared pile to feeder accurately and conveniently.
● Single position engagement pneumatic operated mechanical clutch insures the first sheet after every re-start of machine is always fed to front lays for easy, time-saving and material-saving make-ready.
● The side lays can be switched directly between pull and push mode on both sides of the machine simply by turning a bolt without having to add or remove parts. This provides the flexibility for processing a wide range of material: irrespective of whether the register marks are to the left or right of the sheet.
● Side and front lays are with precision optical sensors, which can detect dark color and plastic sheet. The sensitivity is adjustable.
● Optical sensors with automatic stop system on feeding table enable you to optimize system monitoring- for comprehensive quality control over the entire sheet width and paper jam.
● Operation panel for feeding part is easier to control the feeding process with LED displayer.
● Separate drive controls for main pile and auxiliary pile
● PLC and electronic cam for timing control
● Anti-obstacle device can avoid the machine damage.
● Swiss Rapplon convey belt for feeder and the speed is adjustable
Die-cutting unit
● Pneumatic lock system makes easier lock-up and release of cutting chase and cutting plate.
● Pneumatic lifting cutting plate for easy slide in and out.
● Centerline system on die-cutting chase with transversal micro adjustment ensures accurate registration that result in quick job changeover.
● Accurate positioning of Cutting chase controlled by precision optical sensors with automatic check-lock device
● Cutting chase turnover device
● Siemens main motor controlled by Schneider inverter.
● Micro-adjustment of cutting force （pressure accuracy can be up to 0.01mm of encoder, Max. die-cutting pressure can be up to 300 tons） by worm gear driven by servo motor and controlled easily by 15 inch touch screen.
● Crankshaft is made of 40Cr steel.
● HT300 ductile iron for machine frames and platens
● 7 sets of gripper bars with grippers made of lightweight and durable aluminum alloy with ultra hard coat and anodized finish ensure accurate and consistent paper registration.
● High quality gripper bar from Japan with long life
● Uniquely designed gripper bar need no spacer for compensation to insure accurate paper registration
● High quality Renold chain from England with pre-extended treatment ensures stability and accuracy in long run.
● High pressure index drive system for gripper bar positioning control
● Overload protection device with torque limiter creates the highest level of security for operator and machine.
● Automatic lubrication and cooling system for main drive and automatic lubrication for main chain.
|
|
Sheet Size (Max.)
|
1060*760mm
|
|
Sheet
Size (Min.)
|
450*370mm
|
|
Max.
Die-cutting Size
|
1045*745mm
|
|
Gripper
Margin
|
7mm-17mm
|
|
Max.
Pressure
|
300T
|
|
Paper
Thickness
|
90-2000GSM
|
|
0.1-3mm
cardboard
|
|
≤4mm corrugated paper
|
|
Max.
Die-cutting Speed
|
7500 s/h
|
|
Max.
Pile Height at Feeder
|
1600mm
|
|
Max.
Pile Height at Delivery
|
1350mm
|
|
Main
Motor Power
|
11kw
|
|
Total
Power
|
17kw
|
|
Weight
|
17 Ton
|
|
Overall
Dimension
|
6260*4560*2580mm
|
|
Air
Source
|
0.5-0.8mpa,600L/Min
|
|
|
|
|
