Full-servo vacuum suction high speed flexo Printing& Slotter of ORTIE-II

Full-servo vacuum suction High speed Flexo printing &Slotter&Gluer Of ORITE-II(Fixed)

I.Computer-controlled operation unit

1, the machine adopts computer control, the Japan servo driver;

2, each unit is equipped with a man-machine interface, easy to operate, accurate adjustment, after the completion of the input can be directly intelligent nearest homing without host positioned one direction to zero and the cutter, baffle back to square one the reorientation low work efficiency;

3, the data is saved: When the correct data in the processed products, the current data is automatically saved for the next use; adjusted automatically according to the instructions when used again, saving tune up the time;

4, adjust the data can be adjusted individually, without the use of the order function can automatically run independent input data, a significant reduction in adjusted time, the convenience of operating procedures;

5, fault display: allows the operator through the fault in the machine is in operation, timely find out the cause of the malfunction;

6, the computer raw data correction: When the original data is lost after the repair of the machine, the user can directly on the color correction to the original data, shorten maintenance time, thus facilitating the user;

7, the memory to zero: the machine in the course of their work, open the machine wipe version or version for a small amount of on the machine can automatically restore the original position;

8, controllable the anilox lift: When a group of temporary do not need to be printed, can be controlled to the anilox do not need to drop, without cleaning the ink roller;

9, can be free to set trim paper time, trim Paper interval time, provide flexibility to fit personal preferences;

10, the main motor screen display speed, feed, jog every Zhang, both positive and negative;

11, on the main screen displays the order set, the actual number of production quotas is completed automatically stops feeding anilox automatically from the plate;

12, orders Default: computer color on demand processing orders, cartons of various data input;

13, the feed screen display the tailgate position size and has a upper and lower alarm protection function;

14, the operation of the machine work accident, the screen display is overloaded and automatically shut down;

15, when the improvement of the company's software, within three years free upgrade;

16, the Ministry of feed, printing, die-cutting of auto-zero.

II. Feeding unit

Feeding unit use lead  edge feeder technology ", suitable for all types of corrugated;

Send the feed roller driven by servo motors, without mechanical transmission error;

Vacuum auxiliary lead edge feeder wind, air pressure can be adjusted according to the paper size.

1，Machine clutch

1), electric control machine clutch attached to an alarm, warning road between the continuous ringing, to ensure the safety of workers.

2), every landline station device emergency stop switch, an internal control to stop the machine moves to ensure the security of the internal operations personnel.

3), the the pneumatic interlock device.

4) can be continuous or skip feeding.

2, Vacuum System

1), equipped with a suction debris and dust removal machine and sticky roller, can eliminate a large number of the cardboard printing surface impurities, improve the printing quality.

3, Free press agency(Optional)

1) Free-pressure mechanism makes corrugated board from pressure; avoid infiltration cardboard appear shocked and solve the washboard occurs when printing field; secondly there is no need to adjust the feed frequently state, can print consistency.

2), without the need for pressure adjustments, the auxiliary operation time is almost negligible; while little change in the routine production of cardboard thickness does not affect the feed accuracy, and ensure 100 percent production rate.

3) No paper feed roller, to avoid the line speed changes due to wear and tear caused by the rubber roller chromatic errors caused by printing. In order to ensure product quality and need frequent replacement rollers.

4), to prevent the impact of cardboard and paper feed rubber roller jammed parking, improve the yield of the carton.

）4, automatic document feeder operation control (zero means)

1), the feed around the bezel, electrically adjustable rear gear boxes, and a jogger function.

2), the general use of automatic zeroing device carton, try to print two to adjust to the correct position, reduce cardboard waste.

III. Printing unit

Printing unit multi-machine drive servo motor driven independently, eliminate system cumulative error;

Vacuum assisted roller conveyor to ensure the accuracy of the printing chromatic +0.3 mm;

AC servo motor with no backlash transmission, gear lubrication oil supply system is no longer needed.

1，The printing roller

1), The outer diameter Φ393.97mm the (containing printing plate diameter is Φ408.37mm). (1200)

2), the head plate roller quenching, tempering the whole tube in addition to stress.

3), static and dynamic balance correction, smooth operation.

4), surface grinding, hard chrome plating.

5), the ratchet shaft fixed reel version.

6), bi-directional spinner plate roller skew correcting mechanism.

7), the use of hanging version institutions, convenient installation, suitable for hanging version of 10mm.

8), handling print, foot switch electric control positive. (High and low)

9), the plate roller independent servo drive, no gear backlash cumulative error.

2, the printing platen roller

1), The outer diameter of Φ152.2mm.

2), steel surface grinding, hard chrome plating.

3), balance correction, smooth operation.

4), the printing nip adjustment, the use of computers and electronic digital control

3, high cable ceramic anilox roller

1), The outer diameter of Φ206.65mm. (1000,1200)

2), the steel surface after special processing reticulate sculpture.

3), consistent with outlets on the ink evenly, durable, and durable.

4), marking a special processing technology to extend the life of the plate;

5), a special aluminum squeegee sealed chamber, so that the bending capacity increased by 30%, saving 20% of the ink supply reserves;

6), lined with PTFE green layer, easy to clean non-stick cavity;

7), the use of quick-change anilox type mechanism.

5 the phase adjusting mechanism

1), each unit is independent servo synchronous drive to eliminate accumulated overprint error. Indian Roller intelligent automatic positioning system, plate week after the shift reset accuracy close to zero error.

2), the lateral position of the electric adjustment PLC touch screen control, adjust the distance of 20 mm, the phase modulation accuracy of up to 0.10 mm.

6、the ink circulation

1), pneumatic diaphragm pump, ink stability, simple operation and maintenance.

2), inking diaphragm ink for ink volume adjustable, the installation of the ink alarm device

3), the ink filter, filter the impurities.

IIII. Slotter unit（one set）

Slotting precision: ± 1.5mm

1, wire wheel

1）、Shaft diameterΦ154mm，after two grinding, hard chrome plated, smooth move. (1200)

2）、Line pressing roller gap the scale manual adjustment, the adjustment range 0-12mm.

3)、The pressure line round the use of quality imported polyurethane

2.Slot knife sliding adjustment mechanism

1）、Shaft diameter Φ174mm after two grinding, hard chrome plated, smooth move. (1200)

2）、Slotted knife width of 7mm.

3）、Alloy tool steel heat-treated, grinding toothed slotted knife, hardness and toughness is superb. (Taiwan )

4）、Alloy steel after heat treatment, grinding trimming knife, sharp knife, and high precision.

5）、Pressure line wheel, guide roller, slot knife traverse position, the use of electric button synchronization control.

6)、Pressure line wheel, guide roller, slot knife traverse position, the use of electric button synchronization control.

V.Glue System:

Simple maintenance, reducing maintenance costs.

Peristaltic pump suction cycle, reducing paste waste.

Transport Unit:

Can cope with various thickness of cardboard with a gap adjusting device, receives from the press out of the vertical cardboard.

Folding Unit:

Installation new folding system, in line at the precise folding, trimming the gap can be up and down.

Using suction type main belt, the smooth discharge of the final stage in the folding carton, cardboard edges to prevent distortion.

Left and right two fold belt with a separate motor drive, according to the length and width dimensions individually controlled speed.

Counting and Eject unit

Small cardboard can achieve high-speed running smoothly.

Externally bonded type, portable hole, vent-type can also be stable, smoothly stick the paper box.

Operation Unit:

Configure color LCD touch screen, you can display a variety of alarm information and operational information.

Achieve remote control.

VI, Main technical parameters